In addition, HARTING also produces electronic components for the automobile industry and leads the market in the field of electronic shop and service systems, such as vending machines for cigarettes and prepaid phone cards and the associated management of supplies.

Push Pull Fibre LC is first fibre optic connector in IP67 which complies with industrial cabling

15 November 2005 - Harting The integration of the standard LC fibre optic connector opens new fields of application for fibre in harsh environments. The system is robust, vibration protected and fulfils the requirements according to IP 65/67.

AdvancedMC connector for MicroTCA

08 November 2005 - Harting After being the first company to demonstrate functional prototypes during the 2005 Supercomm show, HARTING has now started the serial production of its new AdvancedMC connector for MicroTCA backplanes.

AdvancedMC connector for AdvancedTCA

08 November 2005 - Harting HARTING introduces a new B+ type AdvancedMC connector for AdvancedTCA with press-fit technology.

RJ Industrial IP 20 Angled Ethernet Connector

18 October 2005 - Harting The HARTING RJ Industrial range gets a new member: the IP 20 over molded 90° angled connector designed especially for applications with limited space.

New Generation of IP30 Ethernet Switch Family

07 October 2005 - Harting The HARTING Ethernet Switch ESC TP08 part of the new IP30 Switch family is developed for use in industrial switch cabinets. The compact design with a width of only 22.5 mm permits a space-saving network installation. Up to 8 Ethernet devices can be connected via RJ45-ports. The concept needs less space in the switch cabinet than the standard solutions in the Ethernet market today.

Han EEE Module, Maximum Contact Density

21 September 2005 - Harting The established Han-Modular range from HARTING is a highly flexible, diverse connector system. The user can assemble connectors to their own special design requirements and configurations.

Han Q 7/0 PCB Adaptor

21 September 2005 - Harting With the addition of the new Han Q 7/0 PCB adaptor the Han Q 7/0 inserts of Han Q series can be directly connected to PC boards. The adaptor can be used with inserts in combination with standard and EMC type housings size Han 3 A.

Increased Construction Size in Robust Metal Hoods

21 September 2005 - Harting The Han-Compact series has been extended by the introduction of two robust metal hoods.

The Solution for 7/8' Interfaces

20 September 2005 - Harting In many newly developed field bus modules a 7/8' interface connector has been included. Screw and solder termination versions of this connector have been on the market for some time.

3D-CAD Models for Download

20 September 2005 - Harting In addition to 2D data sheets containing the most important dimensions and product information, 3D drawing models of HARTING connectors are also available for download.

Dust and Dirt Protected

20 September 2005 - Harting The modern trend towards modular design and the consequent production requirements often require the electrical interfaces of equipment to be protected against the ingress of dust and dirt whilst in transit in manufacturing areas. To address this need HARTING offers a range of reliable dust covers that can be simply fitted to surface or panel mounted housings without the use of a tool. Covers are available in Han 10 B, 16 B, 24 B, 3 HPR, 6 HPR, 10 HPR, 16 HPR and 24 HPR sizes.

Mini Coax Low Profile

09 August 2005 - Harting The Mini Coax Low Profile system is a new concept that offers the same transmission performance as Mini Coax standard but needs less space.

Mini Coax Single Row

09 August 2005 - Harting The Mini Coax Single Row system is a new concept, which allows higher transmission rates compared to the standard Mini Coax connectors.

Mini Coax Backplane Frame

09 August 2005 - Harting HARTING expands its Mini Coax connector family with a Backplane Frame, which allows the feed-through of high frequency analog signals and eliminates long reroutes that affect the high frequency signal transmission.

HARTING Push Pull Interface

07 July 2005 - Harting The structured premise cabling for office networks is specified in the ISO IEC 11801. The draft standard counterpart for industrial applications has now been worked out by the ISO IEC under the title ISO IEC 24702.

10 Port IP 67 Switch ESC 67-10 TP10U HARTING RJ Industrial

13 June 2005 - Harting Switches divide former collision domains into point-to-point connections between the network components and the user equipment involved. Constructing the network this way prevents data collisions.

Han 3 A housing with fixed cover

10 June 2005 - Harting The series of Han 3 A housings has been complimented by a new version with a fixed cover.

Connection of very large wire gauges is possible

09 June 2005 - Harting The established Han-Modular range from HARTING is a highly flexible, diverse connector system. The user can assemble connectors to their own special design requirements and configurations.

HARTING Goes Medical / LDS Process Ready for Production

09 June 2005 - Harting MicroMID has found its introduction into medical technology through use in a new generation of hearing systems. Thanks to the application of new LDS technology, the HARTING Group is in a position to facilitate, with three dimensional parts, in a fully additive manufacturing process, without further tools, the selective application of metal, strip conductor structures.

M12 connectors in panel feed-through configuration

02 June 2005 - Harting Now available from HARTING is a range of panel-mount M12 industrial connectors for panel feed-through applications. The new devices, which use HARTING's HARAX rapid termination technique, are available in Ethernet female D-coded and standard M12 male A-coded configurations, both supplied with 50 cm conductors.

M12 connectors in panel feed-through configuration

02 June 2005 - Harting Now available from HARTING is a range of panel-mount M12 industrial connectors for panel feed-through applications.The new devices, which use HARTING's HARAX rapid termination technique, are available in Ethernet female D-coded and standard M12 male A-coded configurations, both supplied with 50 cm conductors.

Han-InduNet catalogue covers industrial networking components and systems

26 May 2005 - Harting HARTING has produced a new catalogue giving comprehensive product details and technical information on the company's Han-InduNet family of interconnection components and networking systems for data, Fieldbus and power applications in industrial automation systems.

Harting makes the switch to lead-free connectors

19 May 2005 - Harting Harting has introduced lead-free (Pb-free) versions of all its electronics connector families, incorporating optimised surface finishes for solder, crimp, wire-wrap, IDC and press-fit products. The company plans to deliver 90% of its electronics connectors in lead-free form by August 2005, with the remaining 10% being completed by the 1st January 2006: well ahead of the European RoHS Directive coming into force on the 1st July 2006.

Industrial hybrid connector integrates data and power links in Ethernet applications

11 May 2005 - Harting The new RJ Industrial Hybrid connector from HARTING integrates data and power-supply links in a single IP67 protected device for use in hybrid Ethernet networks, leading to a significant reduction in installation costs for the connector and the associated field devices.

M12-RJ45 adaptor for industrial interfacing

25 April 2005 - Harting A new M12-RJ45 bulkhead mounting adaptor has been added to the HARTING range of interconnection products for interfacing in industrial Ethernet systems.

Passive mechanical switching connector for VME64x Bus applications

07 April 2005 - Harting The new Har-bus 64S from HARTING is a passive mechanical switching connector for use in VME64x Bus systems. The 5-row, 160-way connector offers automatic daisy-chain functionality, with the mechanical switching elements guaranteeing the reliable switching of the daisy chain without contact losses.

Shielded M12 connectors for industrial Ethernet

24 March 2005 - Harting Harting has introduced a range of shielded M12 connectors for industrial Ethernet applications.The new M12-L connectors use HARTING's HARAX rapid termination technique for ease and speed of installation, and feature robust metal construction for use in harsh industrial environment, with protection to IP65 or IP67.

Combined module integrates different hard metric connectors

14 March 2005 - Harting The latest addition to HARTING's HM range of hard metric connectors in accordance with the IEC 61076-4-101 standard is the har-bus HM combined module.

Fast Ethernet switchprovides key network transition

24 February 2005 - Harting The new ESC 67-30 TPO5U from HARTING is a fast Ethernet switch designed to eliminate potential collision domains between network components and user equipment in industrial applications. This new 'in between' Ethernet Switch closes the gap between the switch cabinet (IP 20 protection) and hostile industrial environments (IP 65/67 protection). The switch guarantees networking with other stations at the machine, in both line and star/line structures, providing an important interface between these two areas.

D-Sub industrial bus interface system combines ruggedness with EMC protection

29 April 2004 - Harting InduCom from HARTING is a new family of D-Subminiature connectors and RF shielded diecast hoods which combine ruggedness and excellent EMC performance for applications such as industrial fieldbus systems, power supplies and transportation.

Harting presents broadline distributor award to Abacus

29 January 2004 - Harting Connector manufacturer Harting has presented its 2003 Broadline Distributor of the Year Award to the Abacus Group. Abacus Group plc is one of the leading distributors of electronic components in Europe. Established in 1972 as Abacus Electronics, the company has developed both by growth in its core business of component distribution and by acquisition of related businesses.

ACAL TC wins Harting specialist distributor award

15 January 2004 - Harting ACAL TC has won the title of Electronic Specialist Distributor of the Year for 2003 from connector manufacturer Harting. Formerly known as Townsend Coates, the Leicester-based distributor is Europe's largest specialist distributor of electrical connector products and systems.

Fibre-optic module for industrial connector family

11 December 2003 - Harting Harting has added a fibre-optic module to its Han Modular family of industrial connectors. Based on the industry-standard SC passive fibre-optic connector, the new SC-Module allows optical communication links to be integrated into the same connector housings as power, signal and pneumatic interfaces in industrial automation or machine building applications.

Fibre-optic module for industrial connector family

11 December 2003 - Harting Harting has added a fibre-optic module to its Han Modular family of industrial connectors. Based on the industry-standard SC passive fibre-optic connector, the new SC-Module allows optical communication links to be integrated into the same connector housings as power, signal and pneumatic interfaces in industrial automation or machine building applications.

Compact power connector with 'finger safe' inserts

27 November 2003 - Harting The new Han Q 4/2 from HARTING is a compact power connector designed to provide the benefits of space saving, robustness and easy installation in applications such as power distribution units, uninterruptible power supplies and motor drives. Incorporating four power contacts rated at 40 A and two signal contacts rated at 10 A with crimp terminations, the new connector operates at voltages of up to 400 V, and meets UL 94 flammability requirements.

Compact power connector with 'finger safe' inserts

27 November 2003 - Harting The new Han Q 4/2 from HARTING is a compact power connector designed to provide the benefits of space saving, robustness and easy installation in applications such as power distribution units, uninterruptible power supplies and motor drives.

Harting appoints Phoenix to distribute electronics connector products

18 November 2003 - Harting Harting has appointed Phoenix Electronics Distribution Ltd. as its latest UK distributor for electronics products. Founded in 1972, Phoenix is a specialist distributor of connectors and electromechanical components, and the HARTING range - which includes D-Sub, hard-metric, mini-coaxial, DIN 41612 and dedicated bus interface connectors - fits in very well with the overall Phoenix portfolio.

Harting appoints Phoenix to distribute electronics connector products

18 November 2003 - Harting Harting has appointed Phoenix Electronics Distribution Ltd. as its latest UK distributor for electronics products. Founded in 1972, Phoenix is a specialist distributor of connectors and electromechanical components, and the HARTING range - which includes D-Sub, hard-metric, mini-coaxial, DIN 41612 and dedicated bus interface connectors - fits in very well with the overall Phoenix portfolio.

Increased contact density for hard metric 2 mm connectors

13 November 2003 - Harting Harting has expanded its wide range of hard metric 2 mm connectors in accordance with the IEC 61076-4-101 standard with the introduction of a 6-row version of the har-bus HM Series. The new device offers the advantage of an additional row of contacts but uses the same space on the daughter card as a standard 5-row variant.

Increased contact density for hard metric 2 mm connectors

13 November 2003 - Harting Harting has expanded its wide range of hard metric 2 mm connectors in accordance with the IEC 61076-4-101 standard with the introduction of a 6-row version of the har-bus HM Series.

D-Sub module for industrial connector system

30 October 2003 - Harting HARTING has introduced a 9-pin D-Sub connector module to its Han-Modular family of industrial connectors. Integrating a D-Sub connector with the industrial Han-Modular system is particularly useful in situations where sensitive bus signals are present.

Harting introduce a D-Sub module for industrial connector system

30 October 2003 - Harting Harting has introduced a 9-pin D-Sub connector module to its Han-Modular family of industrial connectors. Integrating a D-Sub connector with the industrial Han-Modular system is particularly useful in situations where sensitive bus signals are present. The D-Sub shielding is connected independently of the industrial connector housing, ensuring a high degree of screening.

Shielded M-12 Profibus connector features rapid termination

16 October 2003 - Harting Harting has introduced a shielded M-12 Profibus connector using the company's HARAX rapid termination technique. The new connector features a robust metal body for use in harsh industrial environment, and offers protection to IP67.

Shielded M-12 Profibus connector features rapid termination

16 October 2003 - Harting Harting has introduced a shielded M-12 Profibus connector using the company's HARAX rapid termination technique. The new connector features a robust metal body for use in harsh industrial environment, and offers protection to IP67.

USB computer interface for industrial applications

02 October 2003 - Harting HARTING has introduced an USB port that allows portable computer devices such as laptop PCs, printers and webcams to be linked to industrial networks and control systems in harsh environments.

Industrial Ethernet connectors offer IP67 protection

17 September 2003 - Harting Harting has introduced a number of additions to its RJ Industrial Ethernet connector family which feature IP67 class protection against dirt, dust and fluids. The IP67 data variant of the RJ Industrial connector offers all the advantages of the modular RJ45 data module with HARTING's patented HARAX quick-fit technology.

Industrial Ethernet connectors offer IP67 protection

17 September 2003 - Harting Harting has introduced a number of additions to its RJ Industrial Ethernet connector family which feature IP67 class protection against dirt, dust and fluids. The IP67 data variant of the RJ Industrial connector offers all the advantages of the modular RJ45 data module with HARTING's patented HARAX quick-fit technology. The housing, which is available in metal or plastic and in straight and angled versions, is based on the company's established Han 3A family.

Compact 7-way connector for 3-phase control applications

04 September 2003 - Harting The new Han Q7/0 from HARTING is a compact 7-way connector module that can handle voltages of up to 400 V, making it ideally suited for use in industrial 3-phase motor and invertor systems.

Industrial Ethernet switch is packaged for easy installation

14 August 2003 - Harting The new ESC67 from HARTING is a Fast Ethernet 5-port switch in a robust metal housing sealed to IP67 and designed to meet the mechanical, temperature and EMC requirements of the industrial environment.

Complete range of connectivity solutions for industrial Ethernet

03 June 2003 - Harting HARTING, Europe's leading manufacturer of connectors for industrial networking, has introduced a complete range of connectivity solutions for industrial Ethernet systems. The range of Ethernet products being offered by HARTING covers all the relevant international standards being developed on both sides of the Atlantic by organisations such as PNO (Profibus Nutzer Organisation), ODVA (Open Devicenet Vendor Association), IEC (International Electrotechnical Commission) and IAONA (Industrial Automation Open Networking Alliance).

HARTING connectors form key interface in latest German high-speed train

14 May 2003 - Harting HARTING connectors form an integral part of new communication and control systems in the latest generation of German high-speed trains. The new ICE3 trains are designed for a maximum speed of 330 km/h, and feature more powerful motors and lighter vehicles than their predecessors. They are also designed to be used across frontiers within Europe, so their power supplies have to be compatible with the differing requirements of neighbouring countries.

Communications interface combines ruggedness and EMC protection for rail applications

30 April 2003 - Harting InduCom9 from HARTING is a new communications interface which meets the requirements of the multifunction vehicle bus (MVB) now being adopted as a standard by rail operators and manufacturers for in-vehicle communications and control applications.

Motor adaptor eases connector installation

22 April 2003 - Harting A new adaptor designed to ease the installation of industrial connectors onto motor junction boxes has been introduced by HARTING. The new Han 3A adaptor allows an angled connector to be fitted to a standard PG 13.5 cable entry with a choice of mounting positions. The circular nickel-plated brass adaptor plate contains 12 holes, allowing the housing to be turned in steps of 30° after termination.

High-density D-Sub connectors offer significant space savings

08 April 2003 - Harting HARTING has extended its range of D-Sub connectors with the introduction of a new family providing a higher-density capability within the same standard D-Sub shell pattern.

Anglia wins HARTING Broadline Distributor of the Year Award

25 March 2003 - Harting Anglia, the broadline electronic component distributor based in Wisbech, Cambridgeshire, has won the 'Broadline Distributor of the Year' award from connector manufacture HARTING. The award was presented for the significant increase in Anglia's sales growth over the previous year.

Drives & Controls Exhibition

19 March 2003 - Harting At Drives & Controls 2003, HARTING is launching a range of IP 67 'plug and play' fast Ethernet switches and inter-connectivity solutions. The range of Ethernet products being offered by HARTING covers all the relevant international standards being developed on both sides of the Atlantic by organisations such as PNO (Profibus Nutzer Organisation), ODVA (Open Devicenet Vendor Association), IEC (International Electrotechnical Commission) and IAONA (Industrial Automation Open Networking Alliance).

Northern Connectors wins HARTING's Specialist Distributor of the Year Award for 2002

18 March 2003 - Harting Northern Connectors, the specialist connector distributor based in St. Helens, Lancs., has won the 'Specialist Distributor of the Year' award from connector manufacture HARTING. The award was presented for the significant increase in their sales growth over the previous year.

HARTING connects industrial Ethernet systems

27 February 2003 - Harting The new Han-Brid RJ-45 from HARTING has been specifically designed for the interconnection of devices to Ethernet networks in the harsh industrial environment.

Hybrid connector for industrial data networks

06 February 2003 - Harting HARTING has introduced a new hybrid connector for use in industrial data networks. The new Han-Brid Quintax 3A uses the company's well established Quintax connector insert in a Han 3 A hood and housing. It can accommodate up to four screened data wires with 360° screening through the connector.

Surface-mount compatible D-Sub connector family

21 January 2003 - Harting HARTING has developed a complete family of D-Subminiature connectors that are compatible with surface-mount production processes including reflow soldering. Traditionally, larger components such as connectors have not lent themselves well to surface mounting because of their size and mechanical loading, so the availability of a comprehensive D-Sub range in surface-mount compatible form will bring considerable benefits to customers wishing to take advantage of the higher board densities and increased productivity offered by surface-mount processes.

Compact industrial connector for high-current applications

14 January 2003 - Harting Han-Compact from HARTING is a new compact industrial connector that will accept any single insert from the company's Han-Modular range. The new connector is particularly suited to industrial applications where high-current (over 20 A) power connections need to be made in harsh environments (Pollution Degrees 2 or 3) where limited space is available.

HARTING sets up manufacturing operation for backplane production

11 January 2003 - Harting HARTING, Europe's leading supplier of connectors for the electronics and industrial markets, has set up a new manufacturing operation at its UK headquarters in Northampton. Known as HARTING Integrated Solutions, the new facility specialises in the production of electronic backplanes and related sub-assemblies, including cable assemblies, sub-racks and enclosures.

New additions to industrial connector family

18 December 2002 - Harting HARTING has made a number of new additions to its Han Q/8 industrial connector range, adding flexibility and higher density for motor, convertor and starter applications. Enhancements to the range include new hoods and housings with different mounting options and a new high-density insert offering additional contacts in an extremely compact package.

D-Sub connectors with built-in filtering

11 December 2002 - Harting HARTING has introduced a range of D-Subminiature connectors with built-in filtering to minimise the effects of conducted and radiated RFI emissions as well as providing transient high-voltage protection.

High-current connector is ideal for rail applications

26 November 2002 - Harting The new Han 48 HPR high-current connector from HARTING is ideally suited to use as a motor connector in trains, trams and rapid transit systems. The new connector is based on HARTING's well-established HPR range of hoods and housings, which are EMC compatible, corrosion resistant to IP68, and vibration proof.

Connector links devices to serial power bus

30 October 2002 - Harting The new Han-Power S connector from HARTING allows external field devices such as electric motors to be connected directly to an industrial serial power bus without the need for physically cutting the cable.

High-density module for industrial connector system

10 October 2002 - Harting HARTING has added a high-density module to its Han-Modular range of industrial connectors. The new module incorporates 25 contacts in a standard 34.2 × 14.6 mm single module configuration, and offers voltage and current ratings of 50 V and 5 A, respectively. Both male and female modules may be mounted in the same frame.

Shielded connector for sensitive bus signals

19 September 2002 - Harting Now available from HARTING is the new Han Quintax Z Series, a shielded connector module designed for use with the company's Han-Modular range of heavy-duty industrial connectors. The Z Series contact has been introduced to simplify field assembly and installation.

Electronic identification module added to industrial connector family

22 August 2002 - Harting An electronic identification module has been added to the Han range of industrial connectors from HARTING. The new Han ID module has a built-in EEPROM memory which allows data to be stored for identification and coding purposes or for the storage of process parameters.

Passive mechanical switching connector for VME64x systems

09 August 2002 - Harting The new har-bus64S from HARTING is a passive mechanical switching connector for use in systems based on the VME64x Bus. The new connector is a 5-row 160-way device which offers automatic daisy-chain functionality. The built-in switching elements close the daisy chain when no daughter card is inserted, removing the need for active components or jumpers on VME64x backplanes.

Mixed-Contact D-Sub connector range

06 June 2002 - Harting HARTING announces the introduction of an extensive Mixed-Contact D-Subminiature connector family. The range provides the option of having a variety of contact types including signal with coaxial contacts (50 or 75 ohms) or high-voltage power versions (20 A to 40 A).

Cage-clamp terminals offer ease of installation

21 May 2002 - Harting A new range of industrial cage-clamp terminals that offer ease of termination as well as the ability to withstand higher voltages has been introduced by HARTING. The Han ES New Generation range replaces the separate modular inserts of earlier versions with a single-piece low-profile construction with easy access for both the cable and a screwdriver. As a result, insertion and termination is straightforward, making it possible to ensure a vibration-proof assembly quickly and easily.

Connector hoods and housings with metric cable entries

08 May 2002 - Harting HARTING has introduced metric threaded versions of its Han range of heavy-duty connector hoods and housings. The new connectors conform to the recently published international DIN EN 50262 metric thread specification standard, and the company's existing PG Series (PG7 to PG48) will, in time, be replaced by the metric series M12 to M63.

Coaxial connector for railway applications

23 April 2002 - Harting A new coaxial connector module from HARTING is ideally suited to meeting the increasing demands of the rail industry for the transmission of audio and video signals for passenger information and in-train entertainment.

Right-angled M12 connectors with rapid termination technology

26 March 2002 - Harting A new range of right-angled M12 circular connectors featuring the HARAX rapid termination system has been introduced by HARTING. Designed for use in industrial sensor systems to M12 standards, the new connectors are particularly suited to applications where pre-assembled cable would previously have been used.

Expanded D-sub connector range with new design features

12 March 2002 - Harting HARTING has introduced a number of new additions to its range of D-subminiature connectors including male and female, straight and right-angle versions with stamped contacts and 9, 15, 25 or 37 poles.

Partnership with T-Mobile is a big hit with visitors

31 December 2001 - Harting Espelkamp-based HARTING Vending scored a resounding success at CeBIT in Hanover, the world's largest IT fair, with its new product entitled 'load&call by HARTING'. In cooperation with T-Mobile Deutschland, this new solution was displayed at T-Mobile Deutschland GmbH's retailer center where it was tried out by large numbers of visitors to the show.