As a world-wide supplier of automation products, OMNIFLEX provides technical training, backup and application engineering support to a variety of locally based distributors and value adding re-sellers in order to provide superior levels of technical assistance to system integrators and end users in their own environment.

Real-time event monitoring of critical SHE alarms

02 September 2005 - Omniflex Real-time alarm/event monitoring of critical SHE alarms with true first up monitoring. The Maxiflex 32SOE Sequence of Event module from Omniflex monitors 32 Digital Inputs and creates time-stamped events to a resolution of 1ms upon change of state. By using multiple 32SOE modules with the Maxiflex P3 CPU, powerful low cost sequence-of-events systems can be constructed with up to 480 time-stamped inputs per system.

SMS Alarm Monitor informs the right person fast!

08 August 2005 - Omniflex The Teleterm Silent Sentry is a new low cost, state-of-the-art Alarm Monitor capable of monitoring a wide range of input types and sending SMS Alarm messages upon detection of an alarm condition.

Annunciators send alarm messages by SMS

07 July 2005 - Omniflex Omniflex now offer plant engineers the convenience of having alarms from the their alarm annunciators sent direct to their mobile phones. These days most people have a mobile phone and these can now be used a simple way of being notified of an alarm that has occurred.

Remote displays for safety critical alarms

30 May 2005 - Omniflex The remote Omniflex displays provide from 8 to 120 points of annunciator display in a stand-alone panel-mount package, to work with remote alarm annunciator logic for safety critical alarms. The remote displays recently launched by Omniflex provide from 8 to 120 points of annunciator display in a stand-alone panel-mount package.

Accurate alarm/trip amplifers with safety in mind

30 May 2005 - Omniflex The Omniflex Dual Trip Amplifier is all you need for safety critical applications, where set points reached using 4-20mA, 0-10V (1-5V), or other inputs need to trigger alarms. The Omniflex Dual Trip Amplifier is all you need for safety critical applications, with set poits reached using 4-20mA, 0-10V (1-5V), Universal Inputs such as TC, mV, RTD, V, or frequency signals, producing an alarm to either alarm annunciators, PLCs or DCS Systems.

Three-in-one annunciator sounds the alarm

30 May 2005 - Omniflex Alarm annunciator has all the functionality of an annunciator application integrated into a single unit: annunciator, pushbuttons and audible, no other auxiliary devices are required. The OMNI-8P alarm annunciator is now available from Omniflex. The P stands for Pushbutton as the Pushbutton station and audible is integrated into the front of the unit.

Alarm annunciator has all the functionality of an annunciator application

25 February 2005 - Omniflex Alarm annunciator has all the functionality of an annunciator application integrated into a single unit: annunciator, pushbuttons and audible, no other auxiliary devices are required.The OMNI-8P alarm annunciator is now available from Omniflex.

Take the load off your DCS, SCADA and PLC

23 February 2005 - Omniflex The last two to three years have seen a resurgence in the use of annunciators as a dedicated device in industry, allowing DCS, SCADA and PLC systems to get on with their main function. Take the load off your DCS, SCADA and PLC. We have in the last two to three years seen a resurgence in the use of annunciators as a dedicated device in industry.

Telemetry systems that are voltage compatible

23 February 2005 - Omniflex Have you ever had the problem with Telemetry applications where your field instrumentation is 24Vdc but the Radio equipment runs off 12 volts? We have encountered this on numerous occasions so we decided we would do something about it. We have now launched the PT L50C-D, this is a new combined power supply dual charger 110/220/240Vac to 24V dc and 12Vdc.

Charger powers up telemetry systems

23 February 2005 - Omniflex A new solution from Omniflex aims to solve voltage incompatibility problems in remote telemetry applications. The PT L50C-D is a novel combined power supply and dual charger that runs from a universal 85 to 264V AC input and is designed specifically for those applications that need to maintain both 12 and 24V systems. The PT L50C-D charges two 12V batteries (sealed lead acid) and provides a 24V load connection and a 12V load connection.

An end to site-wide fire alarm obsolescence

23 February 2005 - Omniflex Do you have Obsolescence Issues with your site-wide fire alarm monitoring systems? If the answer is 'yes', the solution suggested by Omniflex is its new 'fire alarm detection interface unit'. Omniflex has developed a bipolar polarity swap interface module which is now widely used for detection of site-wide fire alarms. This fire alarm detection interface unit enables all site-wide fire alarms to have tristate monitoring for the detection of healthy, unhealthy and live alarms. The Module is Din rail mounting and provides eight input channels, 16 output channels and it has LED indication; green for 'input healthy', red for true fire alarm, and extinguished for 'input fault'.

Take the load off your DCS, SCADA and PLC

23 February 2005 - Omniflex The last two to three years have seen a resurgence in the use of annunciators as a dedicated device in industry, allowing DCS, SCADA and PLC systems to get on with their main function. Take the load off your DCS, SCADA and PLC. We have in the last two to three years seen a resurgence in the use of annunciators as a dedicated device in industry.

An end to site-wide fire alarm obsolescence

23 February 2005 - Omniflex Omniflex has developed a bipolar polarity swap interface module which is now widely used for detection of site-wide fire alarms, thereby overcoming fire alarm monitoring obsolescence issues.

Omniflex has developed a bipolar polarity swap interface module

23 February 2005 - Omniflex Omniflex has developed a bipolar polarity swap interface module which is now widely used for detection of site-wide fire alarms, thereby overcoming fire alarm monitoring obsolescence issues.

Telemetry systems that are voltage compatible!

23 February 2005 - Omniflex Have you ever had the problem with Telemetry applications where your field instrumentation is 24Vdc but the Radio equipment runs off 12 volts? We have, so we decided we would do something about it.

Charger powers up telemetry systems

23 February 2005 - Omniflex A new solution from Omniflex aims to solve voltage incompatibility problems in remote telemetry applications. The PT L50C-D is a novel combined power supply and dual charger that runs from a universal 85 to 264V AC input and is designed specifically for those applications that need to maintain both 12 and 24V systems. The PT L50C-D charges two 12V batteries (sealed lead acid) and provides a 24V load connection and a 12V load connection.

Transferring I/O information around the plant?

15 December 2004 - Omniflex Conet is the solution, a uniquely positioned communications infrastructure designed to blend the many communications standards into a network of networks, integrating networks into a unified system.

Omniterm B gives a formidable line-up of products

04 October 2004 - Omniflex Designed for SIL 1 applications and with selected modules having Ex i ratings, the Omniterm B is the smallest range of products covering the largest range of signal conditioning applications. Designed for SIL 1 applications and with selected modules having Ex i ratings, an overview of the range is shown below.

Water industry remote control monitoring systems

20 September 2004 - Omniflex Water industry remote control and monitoring systems with the Omniflex Maxiflex T2 CPUs, a remote terminal unit or programmable controller dedicated to data acquisition and telemetry applications. Water industry remote control and monitoring systems with Maxiflex remote terminal unit or programmable controller.

Conlog products supported by Omniflex

17 May 2004 - Omniflex Omniflex, formerly known as Conlog, are reminding their customers that there are no obsolescence issues regarding the Conlog brand of Omni16 alarm annunciators, I/O systems and signal conditione.

Radiation monitoring for brain imaging centres

20 April 2004 - Omniflex The Wolfson Brain Imaging centre chose the Omniflex Maxiflex I/O system to gather data from their existing Lab Impex Beta and Gamma radiation in air monitors, stack flow monitors and pumps.

Conet OPC Server with date and time stamp handling

14 April 2004 - Omniflex Omniflex have just released a Conet OPC server upgrade that handles date and time stamped events from source, to review the chronological sequence of events leading up to an alarm or trip.

Omniflex appointed preferred supplier by British Nuclear Fuels Limited

15 March 2004 - Omniflex Further to the successful Procurement Vendor Desktop Assessment conducted on Omniflex Limited by BNFL in January 2004, Omniflex Limited has been recognised as a preferred supplier.

Omni16c Annunciators have been assessed as suitable to be used in safety related applications

20 February 2004 - Omniflex Omni16c Annunciators have been successfully assessed as suitable to be used in safety related applications of Safety Integrity Level 1 in accordance with IEC61508:2000, making it first in its field.

Omniflex Announces New Solution for battery-backed DC power systems

20 November 2003 - Omniflex After customer feedback, Omniflex introduce the Powerterm Charger/power supply series, suitable for DIN rail mounting and ideal for RTU's, dataloggers, alarm systems and remote field instrumentation.

'Omniterm' solves all your Loop problems

19 November 2003 - Omniflex Instrumentation loop problems are frustrating at the best of times and downright time consuming affairs for plant maintenance staff to deal with: most problems relate to isolation and ground faults.

Cut inventory: Use a Universal Transmitter

18 September 2003 - Omniflex Omniflex has come up with the Omniterm TXB Universal four-wire transmitter, designed for the widest range of signal conditioning applications in a single off-the-shelf product .

UK and Irish distributors sought by Omniflex

05 August 2003 - Omniflex Omniflex, one of the leading manufacturers of electronic products and systems for the Control and Automation Industry worldwide, are looking for new distributors throughout the UK and Ireland.

HART Network module for data acquisition

27 June 2003 - Omniflex Omniflex Automation Products has released a HART Network Interface Module for its highly successful Maxiflex 1000 Series Data Acquisition System, able to monitor up to 30 HART devices.

Custody transfer systems using Maxiflex

12 May 2003 - Omniflex They require no user application programs when used for data acquisition or telemetry application making them the ideal equipment for this type of system. Simply plug them in; connect field wiring and power up. All I/O is scanned automatically and I/O status assembled into the Data Interchange Table.

Programme-less front end i/o systems for HMIs

16 April 2003 - Omniflex A new set of Maxiflex CPUs from Omniflex are programme-less, requiring no user programmes when used for any data acquisition or telemetry application: simply plug in, connect field wiring and power up.

Tank level monitoring using Hart data acquisition

04 April 2003 - Omniflex Omniflex has released a Hart Network Interface Module for its highly successful Maxiflex 1000 Series Data Acquisition System, allowing the connection of up to 30 Hart enabled devices.

Total radiological monitoring systems

03 April 2003 - Omniflex BNFL and AEA in the UK have installed cost effective Omniflex radiological monitoring systems to collect data from their Harwell or Labimpex monitors for processing by plant SCADA systems.

Multiple temperature monitoring system

23 March 2003 - Omniflex Omniflex has OmniWatch, a temperature monitoring system with a difference: sixteen temperatures can be monitored at once, from any 3 wire RTDs or thermocouples.

Annunciator spares for obsolete Rochester UC30

03 March 2003 - Omniflex The Omni30 Annunciator has been designed as a replacement for the obsolete RIS UC30 series products, but is based upon the most advanced, field proven Omniflex Omni16C annunciator technology.

New MAXIFLEX CPU for Inter-networking

04 April 2000 - Omniflex Omniflex has announced the release of the most versatile CPU ever designed for the Maxiflex RTU product range. This addition considerably enhances what is already a powerful remote I/O system that uses the field proven Conet local area inter-networking technology.