Golfer247 - The latest news and products from the world of golf
Main Menu | News By Date | News By Supplier | News By Category | About Us
 
News by Supplier: Power Over Ethernet

PowerOverEthernet.com was set up and sponsored by DSP Design Limited in the UK. We identified the lack of coherent information on IEEE802.3af and produced this portal of all things 'Power Over Ethernet'. The growth of the market has proved our observations to be correct and now there are many companies who use POE technology in their products. The website has increased in complexity and the amount of data stored there.

Two years on and we have produced a new style website with more information about some of the key players in the marketplace. We are now sponsored by key players in the POE market place and the services and information on this website will increase as a result. A newsletter is sent out regularly to all our subscribers to keep them up to date with progress.

If you would also like to receive our newsletter, please subscribe on the following page: Newsletter Subscriptions

Our news and product content is mainly gathered from manufacturers sending us press releases and news. We also search the web for relevant stories. If you have POE news then please submit it to us on info@poweroverethernet.com

Repotec from Taiwan have produced a 10 port switch that supports up to gigabit Ethernet and POE
18 November 2005 - Power Over Ethernet
The RP-PEG12W switch can be managed through Ethernet port using web-based management unit, associated with web-based management, the network administrator can logon the switch to monitor, configure and control each portˇ¦s activity. In addition, the switch implements the Quality of Service, VLAN and Trunking. The feature list is quite impressive and can be found at the following link.
Microsens and Snom team up to provide VoiP in Fibre Optic Networks
31 October 2005 - Power Over Ethernet
A growing number of companies are opting to use fiber optic networks, which in comparison to conventional copper networks offer greater life expectancy and efficiency and are considerably more cost-effective in terms of installation and maintenance. In combination with the 'Fiber-to-the-Office' components from Microsens and the secure business telephones snom 320 and snom 360, equipped with copper connections, now also enable economic IP telephony on fiber optic-based networks.
DPoE Power Patch Panel Solution for Power Over Ethernet Applications
28 October 2005 - Power Over Ethernet
PANDUIT announces the 12-port DPoE Power Patch Panel. This new product expands the family of managed network products specifically designed to provide increased manageability and improved total cost of ownership. The 12-port DPoE Power Patch Panel is a reliable, cost effective network component that capitalizes on the opportunities of the convergence of data and Power over Ethernet.
Shore Microsystems Provide Mission Critical POE Solution
25 October 2005 - Power Over Ethernet
Shore Microsystems SM2501 which supports Power over Ethernet has a failover rate of 100mS for the SM 2501 . The relay based design also allows the SM 2501 to continue passing data on its Primary Network connection should its power supply fail.
PowerDsine white paper on 'The Smart Path to Providing Power for IP Telephony'
25 October 2005 - Power Over Ethernet
A interesting white paper which gives you the logical reasoning as to whether to choose Mid Spans or Switches for your VoiP system. Author: Sharon Dagan, Product Manager, Systems PowerDsine Inc. Proprietary Information Copyright © 2005 PowerDsine Inc. All rights reserved.
ProCurve Switch 2600-8-PWR Will Simplify & Lower Cost of Wireless LAN Access Point Deployment
17 October 2005 - Power Over Ethernet
ProCurve Networking by HP continues to expand the Adaptive EDGE Architecture with the introduction of an 8-port Power-over-Ethernet switch. The new ProCurve Switch 2600-8-PWR with Gigabit Uplink\ is designed to connect smaller numbers of PoE devices such as WLAN access points, IP phones, security cameras and RFID readers, easier and more cost-effectively.
Snom 360 and 320 SIP telephones have been fully 802.3af certified
14 October 2005 - Power Over Ethernet
The snom phones were tested by PowerDsine against their own 'Midspan' PoE devices, and with PoE-enabled IP switches based on their integrated 802.3af integrated solutions. Internal to snom, the phones have also passed compatibility testing with power-sourcing equipment from RedHawk, 3COM, Microsens, HP, Juce, and NetGear.
PhiHong joins new IEEE 802 3 Task Force
14 October 2005 - Power Over Ethernet
Phihong USA, the global leader in low cost power supplies, has joined the new IEEE 802.3 task force, which was formed to create an improved PoE standard. Building on the original IEEE 802.3af standard, the new IEEE 802.3at initiative, designated PoEPlus, will more than double the wattage available to powered devices.
Firmware upgrade for Sifos PowerSync Analyzer
13 October 2005 - Power Over Ethernet
Sifos Technologies releases PSA 2.0 Software for its PowerSync Analyzer family of products. PSA 2.0's new features are: Power and accuracy of the PSE Conformance Test Suite is increased and more parameters are tested; users can now test beyond just the Full 802.3af parameter set; PSA 2.0 improves the ease of use of PowerSync Interactive (the PSAs' GUI); new commands are added to the Tcl/TK command library for use by those using PowerShell, the PSAs' Tcl scripting language.
ZULTYS Announces 24 Port POE Switch with 48 Vdc Input
13 October 2005 - Power Over Ethernet
Zultys Technologies have announced the release of the EPS24. This switch has 24 10/100 Ethernet ports and a 1 Gb/s fiber port. It provides industry standard power over Ethernet on all copper ports. As with everything that Zultys manufactures, this product fully embraces open standards and therefore supports IEEE 802.3af.
New report from NetLink Research, LLC, indicates rapid growth for POE
18 September 2005 - Power Over Ethernet
70% of North American IT managers are currently using Power over Ethernet and an additional 13% will add PoE in 2006, according to the just released NLR report '802.3af Power over Ethernet: VOIP, Wireless and Other PoE Implementation Trends'. Enterprise IT managers report that growth of PoE-enabled ports will be much greater than growth in non-PoE ports. But the future of PoE is dependent on two factors: what applications are driving PoE and whether vendors can resolve current PoE implementation problems.
Power Over the Ethernet, Wave of the Future
14 September 2005 - Power Over Ethernet
While travelling to a recent BICSI education seminar in Prague, Czech Republic, I was suddenly taken aback by how many mains (power) adapter plugs I was carrying! AC mains to DC adapter plugs for mobile phone, digital camera and PDA plus the AC/DC unit for my laptop. In addition to these I also had several mains plug/socket converters to cater to the array of mains plugs/sockets used throughout Europe. In total I was carry several kilograms of these devices, which took up a considerable volume of my luggage.
Sifos Technologies Introduces the Latest PowerSync Analyzer
24 August 2005 - Power Over Ethernet
The Compact PSA, for IEEE 802.3af Testing Sifos Technologies releases the new Compact PowerSync Analyzer. The Compact, a 2-port PSA, significantly reduces the price of testing Power over Ethernet for R&D, engineering and field test, yet provides the same power and capability as the larger PowerSync Analyzers. The Compact doesn't need a chassis or other test equipment to test for complete IEEE 802.3af compliance.
Seminar Specifically for Education & Health IT management
09 August 2005 - Power Over Ethernet
In June of this year Gardiner Security, 3Com and DSP Design joined forces to deliver a technical seminar in Cornwall, England to an audience from the Education and Health vertical market areas. The event was a 2 day technical discussion held in Liskeard, Cornwall England and centred around Wireless, Power over Ethernet, and Security echnologies with design and product advice being given to the audience.
PANDUIT DPoE Power Patch Panel
03 August 2005 - Power Over Ethernet
The DPoE Power Patch Panel provides a dependable, cost effective solution for capitalizing on the full opportunities of convergence and PoE. IP telephones, network security cameras, and wireless access devices that need to be powered like any other network device. These devices are often deployed in locations where an available power source is not readily accessible. Supplying managed power through the data cabling is therefore an attractive alternative.
D-Link surges ahead on Ethernet power
02 August 2005 - Power Over Ethernet
D-Link, a leading provider of networking and communication solutions to the consumer, SMB and enterprise markets, has today announced the launch of a new Power over Ethernet switch, the DES-1526. This switch presents a cost-effective solution for small and medium businesses looking to build a flexible network that combines Power over Ethernet with a powerful and manageable 10/100Mbps switch.
Mid Span Hub with Integrated UPS
02 August 2005 - Power Over Ethernet
The 802.3af compliant Juice Box MX simplifies installations and provides optional integrated battery backup. MX models come in 6, 12 or 24-port versions and can be configured with Web/SNMP interfaces.With the extension of the Ethernet network to include VoIP phones and Wireless Access Points, the additional power requirements placed on your AC UPS system can reduce battery backup time significantly. This reduction means that the UPS systems no longer provide the backup time that the software platform requires to accomplish a graceful shutdown.The low cost solution to counteract this loss of system backup is to provide battery backup specifically designed for the devices providing PoE. By integrating batteries with the PoE midspan injector, the 'Backup Juice' Integrated UPS eliminates the additional power load on the existing AC UPS and the resulting decrease in battery backup time.
Linear Technologies Introduce Power over Ethernet IEEE 802.3af PD Interface
01 August 2005 - Power Over Ethernet
The LTC4267 integrates the 25kΩ signature resistor, classification current source, thermal overload protection, signature disable and power good signal along with an undervoltage lockout optimized for use with the IEEE required diode bridge. The precision dual level input current limit allows the LTC4267 to charge large load capacitors and interface with legacy PoE systems.
POE survey - your input will help
20 July 2005 - Power Over Ethernet
Venture Development Corporation needs input from manufacturers, OEM, integrators, and users of PoE equipment. Their last report was spot on, your input can help make this one as good.
Panduit DPoE 120-Watt Power Supply
15 July 2005 - Power Over Ethernet
Panduit have produced the DPoE 120W stand-alone PSU for the DPoE Power Patch Panel solution. The small profile minimises space and allows for flexible placement inside the rack the unit can be mounted on the floor or a rack shelf.
Silver Telecom introduce a complete Power over Ethernet module for the Powered Device
13 July 2005 - Power Over Ethernet
The Ag9000 is ideal for any Ethernet peripheral up to 12W, such as IP phones and gateways, wireless access points, web cameras and security cameras, door entry systems, RFID tag readers, security systems (PIR, fire detectors, etc), network drives, Bluetooth access points and video servers.
New Patent for PowerDsine
12 July 2005 - Power Over Ethernet
PowerDsine Awarded U.S. Patent for Network Connectors with Power over Ethernet Functionality New PoE Patent Saves Space in Ethernet Switch Designs. PowerDsine Ltd. who are a pioneer in Power over Ethernet solutions, announced today it has been awarded a patent in the United States for PoE functionality in a connector assembly. This patent further extends PowerDsine's patent portfolio in PoE integrated technology.
Philhong's 1U rack provides POE and network RPS compatibility
07 July 2005 - Power Over Ethernet
Phihong USA, introduced a 1500-Watt 1U rack for RPS and bulk power sources. With quick disconnect connectors for three individual loads, the PSM1554 accepts three PSM500 500-Watt power supplies.
A new switch from D-Link brings a simple way to drive your POE devices.
04 July 2005 - Power Over Ethernet
The DES-1316 16-port Smart Switch combines 10/100Mbps Ethernet switching with 802.3af standard remote power on network cabling of up to 100 meters. This switch presents a cost-effective solution for the small and medium business, delivering the perfect combination of functionality, ease of use and affordable pricing.
Fastiron Super X from Foundry
01 July 2005 - Power Over Ethernet
VoiP switch is Vendor Agnostic, is the claim for the Fastiron Super X, if you are using Cisco, Nortel, Avayaor Siemans, Foundry Networks have the switch that will work with each or them.
New 6 Digit POE Clock
29 June 2005 - Power Over Ethernet
Inova Display Systems have added a 6 digit Clock to their range.The 6 digit clock from Inova Display Systems not only displays the time but also stores the date internally. Built in daylight saving and time zone setting makes the maintenance free clock a breeze to install.
First Power Over Ethernet Gas Detector
08 June 2005 - Power Over Ethernet
Innovative new gas detector provides cost effective solutions for the semiconductor and electronics industry. The MIDAS sensor relies on POE for its power and data transfer.
Hot Swappable DPOE Power system for Patch Panel
25 May 2005 - Power Over Ethernet
The DPOE Power System is a powerful, efficient, compact solution for powering the DPOE Power Patch Panel. Because it is also highly reliable, this power system is an attractive solution for enterprise data center, embedded applications or telecommunications needs.
Philhong multiport midspans now compatible with gigabit systems
17 May 2005 - Power Over Ethernet
Phihong, the global leader in low cost power supplies, now offers a multiport midspan power injector for Power-over-Ethernet applications that can be used with Gigabit systems.
New VOIP Phone from Perfectone
13 May 2005 - Power Over Ethernet
Perfectone the Hong Kong based company is an innovative designer and marketer of VoIP terminal products such as VoIP telephones, VoIP gateways and USB phones for Internet soft phones.
First industrial power over Ethernet switch addresses chicken/egg question
13 May 2005 - Power Over Ethernet
GarrettCom, Inc., is bringing the flexibility and cost-savings benefits of Power-over-Ethernet to industrial applications with the introduction of its four-port Magnum PS14P PoE Power Source Convenient Switch. The hardened PS14P switch is the first industrial-spec switch to offer an IEEE 802.3af standards-compliant way to power and connect small devices such as IP phones, surveillance cameras, wireless access points and industrial sensors at the remote edges of an industrial network.
Emerson Launches NterpriseIP Solution for Internet Protocol Telephony
06 May 2005 - Power Over Ethernet
Emerson Network Power, a business of Emerson (NYSE:EMR), today announced the launch of its NterpriseIP Solution, designed to offer customers worldwide the ease and flexibility of implementing the 'six-nines' backup power they need to protect critical Voice over Internet Protocol infrastructures from costly failures, all in one plug-and-play solution.
Product News Desk - Put your product news here
01 May 2005 - Power Over Ethernet
If you have a Power over Ethernet related, product or story send it to us and we can publish it for you here. We have many regular visitors to this website and 1000s of hit per week.
Quick Guide to Power Over Ethernet Technology
25 April 2005 - Power Over Ethernet
Ever since Ethernet was invented and it used a CAT5 cable, engineers have been using the spare conductors in the cable for other purposes. The most common use was to provide power to the other end of the cable, some put two Ethernet connections down the cable.
Inova releases world's first PoE clock
22 April 2005 - Power Over Ethernet
The OnTime clock connects to a time server such as National Institute of Standards and Technology time server via an existing PoE enabled LAN to recieve time updates, keeping the clock accurate.
Aruba 52 Power over Ethernet WLAN AP
22 April 2005 - Power Over Ethernet
The Aruba 52 AP is the first dual-purpose wireless device that functions both as an access point and as an air monitor letting administrators provide user access or monitor the air across the 2.4GHz and the 5GHz spectrum.
Extreme Networks' New Summit 400
17 April 2005 - Power Over Ethernet
New Summit 400 switch additions add stacking, support for device discovery, integrated wireless LAN connectivity and PoE.
PoE Contactless Smart Card Reader
16 April 2005 - Power Over Ethernet
Smart Card Developments Ltd. have produced what is believed to be the first MiFare contactless 'Power Over Ethernet' smart card reader/writer.
Power over Ethernet revenues $96.09m in 2004
11 April 2005 - Power Over Ethernet
According to a recent report from market researchers IDC, Power Over Ethernet will ultimately become a defacto technology embedded in LAN switches. 'As enterprise IP telephony and wireless LAN technologies become more mainstream in 2005, PoE shipments is expected to more than double this year,' says Grace Yeo, a Research Manager.
'Group Test Event 'Plugfest' Interest is Growing' says InterOperability Laboratory
03 April 2005 - Power Over Ethernet
The Power over Ethernet Consortium tests Power over Ethernet products and software from both an interoperability and conformance perspective, some of the world's leading PoE manufacturers such as PowerDsine, Linear and Texas Instruments attended the last group test in June 2004.
Red Hawk's BL-8000 PowerSens Series
03 April 2005 - Power Over Ethernet
The PowerSense Hub Family includes 20 slot and 10 slot modular chassis units which may be populated with any combination of PowerSense modules. Mix and match modules for support of CDP devices, IEEE 48 volt, 24 volt or 12 volt applications within the same chassis.
Linear's 4-port Power over Ethernet controller features complete Powered Device detection
03 April 2005 - Power Over Ethernet
The LTC4258 is a quad –48V Hot SwapTM controller designed for use in IEEE 802.3af compliant Power Sourcing Equipment. It consists of four independent ports, each with output current limit, short-circuit protection, complete Powered Device detection and classification capability, and programmable PD disconnect using DC sensing. Used with power MOSFETs and passives as in Figure 1, the LTC4258 can implement a complete IEEE 802.3af-compliant PSE.
Micrel's MIC2196 PoE IC ideal for space-sensitive and low voltage applications
03 April 2005 - Power Over Ethernet
Micrel's MIC2196 is a high efficiency PWM boost control IC housed in the SO-8 package, reducing external component count. Its fixed frequency PWM architecture also makes the MIC2196 is ideal for noise-sensitive telecommunications applications.
Phihong release PoE Injector
22 February 2005 - Power Over Ethernet
Phihong, has introduced its new high power single port power injectors for applications. The PSA19U high power one port injector is fully compliant with the new IEEE802.3af international standard and provides 20W, while the PSA29U provides 30W in a proprietary design. The product is ideal for applications such as wireless multi-radio access points with A,B and G standards, Pan Tilt Zoom cameras, and IP phones with streaming video displays.
Phihong Introduce New Multiport Midspan
22 February 2005 - Power Over Ethernet
Phihong has introduced its new multiport Midspan power injectors for Power-over-Ethernet applications. Available in 8, 16 and 24 port versions, the Midspans offer full 15.4W per port, at a cost they claim is 40 percent lower than competitor solutions that have only limited total power capability.
PowerDsine has operated testing program for third party products to verify their PoE compliance
22 February 2005 - Power Over Ethernet
Amongst the many products already certified are IP Video cameras and other network devices such as IP phones, wireless hubs, and security access devices. PowerDsine is a founding member of the IEEE 802.3af task force, as well as an important member of the latest IEEE 802.3 study group examining the need to add support for higher power network devices.
LightPointe Optical Wireless Comms Now uses PoE
04 October 2004 - Power Over Ethernet
LightPointe, a designer and manufacturer of optical wireless products based on free-space optics technology, introduces FlightLite 100, incorporating Power over Ethernet technology, which provides direct Ethernet-to-laser connectivity and eliminates the need for additional electrical wiring.
PLANET Announces POE-150/150S 802.2af Injector/Splitter
04 October 2004 - Power Over Ethernet
PLANET's POE-150/150S Power over Ethernet Injector and Splitter are now available. Models POE-150, 802.3af compliant in-line power injector injects 48VDC power into the Ethernet wire. And model POE-150S seperates the in-line power into data and DC voltage.
Case Study, Dartmouth College Deploys VoIP with PoE
04 October 2004 - Power Over Ethernet
This in-depth Campus-Technology.com article by Joseph C. Panettieri explains how the the Ivy League school will deploy VoIP services to all of its students, representing 7,500 IP phone extensions, and provides advice for others considering the transition to VoIP.
Toshiba Launches New Generation IP Telephones, Extend Strata(R) CTX Functionality
04 October 2004 - Power Over Ethernet
Toshiba America Information Systems, Inc., Digital Solutions Division today announced the launch of its new generation family of IP business telephones, in advance of the introduction of its first native IP telephony system, the new Strata CIX business communications system.
DL-100/110 Splitter/Integrator
04 October 2004 - Power Over Ethernet
The Gentek DL-100 Splitter and DL-110 Integrator have been designed and tested to work with and safely power the D-Link Internet cameras DCS-5300 and DCS-2000 series cameras. Also, many other non-PoE devices needing to convert to PoE within an existing LAN infrastructure.
HyperAmp Family of 802.11b and 802.11g Power-Over-Ethernet Amplifiers
04 October 2004 - Power Over Ethernet
HyperLink Technologies, Inc have introduced a family of bi-directional amplifiers with integral Power-Over-Ethernet interfaces. These amplifiers feature HyperLink's Active Power Control circuit and are 802.11b and 802.11g compatible
New Power Over Ethernet TCP/IP Intercom
04 October 2004 - Power Over Ethernet
External power supplies are no longer required for the ii3 IP Intercom Series. Digital Acoustics Corporation, developers of award winning, patented technology products has released new PoE options for their popular ii3 IP Intercom Series.
PoEPlus to Increase PoE Power Levels?
29 September 2004 - Power Over Ethernet
The IEE802.3af standard limits power delivered to about 13W, though in practise somwhat less than this may be available, due to power conversion inefficiencies. This is fine for many applications, but not enough for others, powering laptop computers for instance.
SynQor announces 52.5V Half-brick DC/DC Converter for Power Over LAN Applications
27 September 2004 - Power Over Ethernet
SynQor has announced the release of a single output isolated dc/dc converter ideally suited for Power Over LAN, IP Telephony and isolated bus voltage applications. The standard half-brick module is part of the PowerQor Tera series and is capable of delivering 200 Watts of output.
PowerDsine launches new PoE midspan for small businesses and hotspots
20 August 2004 - Power Over Ethernet
PowerDsine has released a new Power-over-Ethernet-based product in its midspan product line for the small- and medium-sized business market segment, writes Chris Talbot of eChannelLine at integratedmar.com
Toshiba announces IK-WB02A PoE Security Camera
20 August 2004 - Power Over Ethernet
The IK-WB02A Network Camera, set to be released in September, provides easy and cheap installation by supporting PoE.
PowerDsine announces winners of Educational Grant Program
20 August 2004 - Power Over Ethernet
PowerDsine announced today the winners of the PowerDsine Educational Grant Program which was launched April 6 and offered $100,000 worth of PoE Midspan products to educational institutions operating in the United States and Canada.
TI offers complete PoE Solution
19 August 2004 - Power Over Ethernet
The PTB48540 series of power modules is specifically designed to provide an isolated, low-voltage power source to a remote Powered Device in Power-Over-Ethernet applications. These modules are rated 10 W and incorporate all the necessary interface requirements to comply with IEEE Std. 802.3af, for managing the input power to the PD from the PoE Power Sourcing Equipment. This includes PD detection and PD classification current signatures required for the PSE. The modules are compatible with PD classifications, class 0 through class 3.
Using 802.3af Power Over Ethernet as a Sysadmin Tool
30 July 2004 - Power Over Ethernet
By using Power over Ethernet (802.3af) to provide power for devices such as WiFi Access Points, VoIP desktop phones, and webcams, companies can save on A/C wiring costs and UPS provisioning. Daniel P. Dern of InformIT tells you how you can gain additional sysadmin capabilities, including remote off/on/reboot and power provisioning management.
VoIP: the promise and the pain
30 July 2004 - Power Over Ethernet
Merging the phone system into the enterprise network makes perfect sense. But is it worth the investment? In this InfoWorld article, Leon Erlanger explores the attractions, but also points out what is holding back VoIP.
Micrel releases Powered Device evaluation boards based on control ICs
29 July 2004 - Power Over Ethernet
Both Isolated (featuring the MIC9130 IC) and Non-Isolated (MIC2196) versions are available, and include a low cost PoE signature and classification circuit, an EMI filter, and a flyback dc/dc converter using the IC.
Phihong develops PoE DIMM-Based Networking Switch Solution
29 July 2004 - Power Over Ethernet
Phihong, recently introduced Power over Ethernet DIMMs for implementing 8-48 ports in IP Phone systems, switches and blades. The DIMMs can fit vertically on a PCB in a 1U rack, reducing the board area required to implement by over 50% compared to competitive solutions.
Linear releases two new PoE Controllers
22 July 2004 - Power Over Ethernet
Linear Technology is shipping two quad Power over Ethernet controllers that are fully compliant with the IEEE 802.3af specification. These controllers provide autonomous operation for Power Sourcing Equipment, sequencing through all of the required tasks without processor intervention.
Axis adds 211 to its range of PoE cameras
22 July 2004 - Power Over Ethernet
The AXIS 211 aims to set a new standard for performance, featuring in, and outdoor operation, progressive scanning, varifocal DC-iris lens and Power over Ethernet.
Ixia shows off it's PoE testing solution at PoE Consortium Event
22 July 2004 - Power Over Ethernet
Ixia has announced that the world's first PoE test solution for validating power-enabled equipment, was successfully implemented with participating members of the PoE Consortium Event hosted by the The University of New Hampshire InterOperability Laboratory (UNH-IOL) last month.
IDC releases 'Worldwide Power over Ethernet 2004-2008 Forecast & Analysis'
22 July 2004 - Power Over Ethernet
This IDC study, entitled 'Worldwide Power over Ethernet 2004-2008 Forecast and Analysis: Who's Got the Power?' looks at the PoE market and presents IDC's first forecast for its adoption in the LAN switch marketplace.
Troubleshooting PoE systems with a voltmeter
05 July 2004 - Power Over Ethernet
The first item to understand is the use of the four pairs within the CAT-5 cable. I call these the crazy eights because some wires are shorted at both ends and some wires carry balanced data. Each pair in the cable is made up of a major (background) and minor (stripe) color. So the orange pair has two wires, one orange with a white stripe and one white with a orange stripe. The pairs have 36 twists per foot for CAT-5.
ADC Introduces Midspan Power-over-Ethernet Controller
05 July 2004 - Power Over Ethernet
ADC's Midspan Power-over-Ethernet Controller claims to provide a flexible way to power IP telephony devices and other applications over a local area network. The IEEE 802.3af-compliant power source ensures reliability of service for Ethernet devices such as IP telephones, Wi-Fi access points, security cameras and other network components requiring 12.95 watts or less.
Power Over Ethernet: What It Means For VoIP
02 July 2004 - Power Over Ethernet
Amir Lehr, Vice President of Marketing at PowerDsine, looks at how PoE might accelerate the adoption of VoIP technology. This is a shortered version of the original published at tmcnet.com. The enterprise IP telephony hype has quieted down during recent times, and now, silently, implementations have begun. One indication that enterprise deployments of IP telephony systems are gaining momentum is the fact that all manufacturers have stopped investing in PBXs and have devoted development resources to IP technologies.
Power Over Ethernet vs. Powerline Technology , Whats the Difference?
02 July 2004 - Power Over Ethernet
An extract from a larger Q&A session, this article explains the difference between the two easily confused technologies.
Impact of Power-over-Ethernet on Industrial-based Networking
02 July 2004 - Power Over Ethernet
The evolution of PoE, a self-powered Ethernet connection, is yet another example of the adaptability of Ethernet technology that uses the inherent ability of a copper based connection to transmit both data and power from point A to B over UTP cable. The list of applications for self-powered Ethernet connections is long. A relevant example is the adoption of Ethernet technology within industrial-based networking systems. Prior to looking at this example it is necessary to explain how PoE systems evolved as an alternative solution to a Plain Old Telephone Service.
Using Power Over Ethernet as a Sysadmin Tool
02 July 2004 - Power Over Ethernet
PoE has been around for a number of years, with proprietary (and often noninteroperable) implementations from Cisco, PowerDsine, and others. In June 2003, however, the IEEE ratified its 802.3af Power over Ethernet standard, which has, in turn, spurred standard-compliant 802.3af products.
Power Over Ethernet Will Be Part of Your Future
02 July 2004 - Power Over Ethernet
POE will fundamentally change the way wireless networks and voice-over-IP telephones are implemented, writes eWEEK's Cameron Sturdevant. Power over Ethernet, the 802.3af specification published this summer, should be on the shortlist of new technologies that IT managers in nearly any size organization implement in the next two years.
New RJ-45 connector with built in PoE
01 July 2004 - Power Over Ethernet
Tyco's RJ-45 connector, enhanced by PowerDsine's advanced PoE technology will significantly reduce the number of components and assembly cost for manufacturers who are designing next-generation Ethernet switches with IEEE 802.3af-compliant PoE functionality.
Defacto Wireless includes PoE technology in Wi-Fi Access Points
01 July 2004 - Power Over Ethernet
Defacto Wireless supplies technologies and equipment to WISPs and uses PoE in it's latest wave of products to make thier products easier and simpler to install.
SEI announces Juice Box mid-span power hub
01 July 2004 - Power Over Ethernet
System Engineering International has announced the release of the Juice Box mid-span power hub for Power-over-Ethernet. The Juice Box provides 24 power ports, is fully compliant with IEEE-802.3af, requires only 1U of rack space, and comes standard with both WEB page and SNMP interfaces.
MacWireless brings PoE technology to Mac users
01 July 2004 - Power Over Ethernet
MacWireless offers a range of splitters designed mainly to power remote base stations and access points.
PowerJack: Series of Integrated Connector Modules for End-Span PoE Applications
01 July 2004 - Power Over Ethernet
Pulse has announced the new PowerJack Series of dedicated Integrated Connector Modules for end-span Power over Ethernet applications. These are the first dedicated one row by one column (1x1), one row by two columns (1x2), and one row by four columns (1x4) ICM solutions compliant with IEEE 802.3af. They maintain system HiPOT integrity and typically provide greater than 2 kilovolts isolation.
HP adds PoE support to major Switch series
01 July 2004 - Power Over Ethernet
HP has added PoE functuality to its modular ProCurve 5300xl series. The Switch xl 10/100-TX PoE module simplifies network deployment of IP phones, wireless access points, and other standard-compliant infrastructure devices.
Maxim Introduces PSU Chip With In-Built Powered Device Interface
30 June 2004 - Power Over Ethernet
Maxim Integrated Products introduces the MAX5941/MAX5942, the industry's first power-over-Ethernet DC-DC controllers that integrate an interface controller for powered devices such as IP phones, wireless LAN access point, and IP cameras.
First Complete Power-over-Ethernet Plug-in Module from TI
30 June 2004 - Power Over Ethernet
TI has announced the industry´s first, fully IEEE 802.3af-compliant plug-in power module for Ethernet-powered devices. The PTB48540 module aims to reduce time to market for designers of specialized, Ethernet-powered devices.
TI Announces New Integrated Circuit Controller
30 June 2004 - Power Over Ethernet
Texas Instruments have announced a versatile new integrated circuit controller. TI´s new TPS2375 manages discovery, classification and delivery of direct-current power to a powered device.
Cameras powered by PoE from IQinVision
30 June 2004 - Power Over Ethernet
The IQpoet allows an IQeye camera to be powered by PoE and then placed upto 100m from the nearest power source.
AULT's PW130 PoE Injector
30 June 2004 - Power Over Ethernet
Ault's new PW130 is a self-contained power injector designed for simple setup and easy use.
Panel PC takes its Power from Ethernet
26 April 2004 - Power Over Ethernet
New from DSP Design is the first ever touch screen, flat panel computer to be powered over an Ethernet CAT5 cable.
QSI Corporation Offers Power-over-Ethernet on the QTERM-G70
26 March 2004 - Power Over Ethernet
QSI Corporation is offering Power-over-Ethernet on their QTERM-G70 graphics terminal. This technology will allow users to replace older proprietary power sources and eliminate the need to run 115 VAC power to devices on a wired LAN. QSI Corporation believes they are the first in the industry to offer Power-over-Ethernet on rugged graphic terminals.
First Power Over Ethernet Card Access System
19 March 2004 - Power Over Ethernet
KMS Systems Inc is on the forefront of Power over Ethernet configured security and parking solutions. They are the first company offering a Power over Ethernet card access system.
Will VoIP be a Mass Market product?
19 March 2004 - Power Over Ethernet
A common thinking among 'Marketing people ' is that for every product that enters the market there must be a path, a target, a need (real or created) that decides how the product must enter the consumer's life, which part of the population is more likely to go for it, which niche it is going to fill and, most important '...certain things being stated, something other than what is stated follows of necessity from their being so.' and that is the final issue: the price.
No Outlet? Don't Worry, an Ethernet Cable May Do
18 March 2004 - Power Over Ethernet
Examples of PoE deployment in schools and hospitals are examined by the New York Times article. If you go online at the office, the chances are better than good that your messages and your Web pages come to your desk through an Ethernet cable. Wrapped in shocking blue or dull gray, with plugs a bit wider than those on a phone line, the cables have become the near-universal path for bringing data into the workplace. They have quickly become a route for telephone conversations, too, with Internet-enabled phones taking root in cubicles and executive suites.
Drivers and Applications for the Power over Ethernet Solution
18 March 2004 - Power Over Ethernet
As the network has become an integral part of the enterprise and small-to-medium business, a plethora of new applications have driven new devices onto the network infrastructure. Perhaps one of the most significant of these in recent years has come through the advent of new IP telephony-based clients that were first introduced in 2000. For the first time, a user-based device that was not a desktop workstation or server was connected, with Ethernet, into the switching infrastructure. The onset of IP telephony brought a new requirement, unheard of up to this point in the LAN hub and switching technology: The requirement to provide power to that end device. Cisco Systems was the first to innovate the capability of providing power to the end device, in this case, the Cisco IP phone, and began work with numerous other vendors within the IEEE to create a standards-based means of providing power from an Ethernet switch port. This capability has been ratified by the IEEE 802.3af committee and is now being widely adopted.
Assessing Power-Over-Ethernet's Near-Term Uses
18 March 2004 - Power Over Ethernet
This prediction is based on interviews with officials at Cisco Systems Inc., Texas Instruments Inc. and PowerDsine Ltd. Temperature, smoke, heat and other environmental sensors will probably be at the top of the list of near-term future developments and will start appearing sometime in the next several years when integrated chips to control power flow become more widely available. POE will make network cameras more prevalent, and cutting the AC cord will also make building security monitors such as badge swipe pads easier to implement. In the next two to five years we might also start to see POE augment batteries in mobile devices. Although the engineering requirements are not trivial, we might see laptops that trickle-charge (charge slowly using a low-power Ethernet cable) from a POE data connection. Cell phones and PDAs could also get in the POE game, making special, expensive power adapters a thing of the past.
Cisco Exercises Power over Ethernet with New 802.3af Modules
18 March 2004 - Power Over Ethernet
Cisco Systems Inc. has announced it is bringing its Catalyst LAN switches up to speed with IEEE 802.3af Power over Ethernet, thanks to a series of modules that support the new standard. This eWeek story from paula Musich provides the details.
3Com launches desktop IP phone
18 March 2004 - Power Over Ethernet
3Com has launched a desktop IP phone which promises much better acoustic quality than conventional circuit switched phones.
Choosing a Power-Over-Ethernet Approach
17 March 2004 - Power Over Ethernet
In this Wi-Fi Planet article, Jim Geier discusses the options for injecting power onto Ethernet cables, and ends up advocating the use of PoE power sources integrated into Switches. When planning the layout of a wireless LAN, you must take into consideration power sources for access points. Some companies limit installation locations to areas where a six foot cord can reach an electrical outlet. Other companies opt to install new outlets, which require extra electrical wiring. Power-over-Ethernet, however, can significantly decrease costs associated with supplying power to access points.
World First Ethernet & PoE motion control card
16 March 2004 - Power Over Ethernet
This is the world first Ethernet and PoE motion control card. This small card (81x71x20) allows you to control small and medium size electrical DC motor (with brushes) from 1 to 70W (continuous power). You can control speed or position of the motor using the integrated PID regulation algorithm using a web browser interface.
Purdue University powered 1100 wireless access points powered by PoE
16 November 2003 - Power Over Ethernet
Purdue University boasts an onsite network operations center that monitors its converged voice, video and data network around the clock and a high-speed research computing network for data-intensive engineering applications. The next step for Purdue in their network evolution was to employ a technology that could make it easier for students and faculty to gain ubiquitous access to the Internet regardless of location on campus. The university chose to deploy a wireless LAN solution.
Power-over-Ethernet Interface PD Controller IC from Supertex
15 November 2003 - Power Over Ethernet
The HV110 provides complete power management and protection for Powered Devices utilizing the IEEE802.3af protocol. As the most complete PD Power Manager available, the HV110 features a 400mA inrush limit and fault current limit, as well as minimum current shutdown; features normally found only in PSE controllers, to ensure maximum protection.
BRG offers a wide range of PoE Digital Clocks
04 October 2003 - Power Over Ethernet
BrightClock commercial digital clocks obtain both time synchronization and power over a single Ethernet cable. BRG Precision Products is a leading manufacturer of Power-over-Ethernet digital clocks, timers, counters and other LED displays.
Uniden UIP300 VoIP Phone
03 October 2003 - Power Over Ethernet
The Uniden UIP300 is an H.323 Executive IP Deskset Phone that is powered by IEEE802.3af.
HV9606 PWM chip Suits PD Designs
19 September 2003 - Power Over Ethernet
The HV9606 allows designers to create highly efficient (>90%) power supplies for a wide variety of distributed board mounted power applications, including Power Over Ethernet.
World on IP Community
19 September 2003 - Power Over Ethernet
I have always believed in the power of VOIP as a real threat to the Telecoms' monopoly. Two cheap consumer devices loom large on this front - devices that create enormous value for the owners while generating little revenue for the phone companies. The first is WiFi access points, which allow the effortless sharing of broadband connections, and the second is our VoIP phones, a real, faithful replica of the usual phones, the difference is: once you have paid for the device you won't pay for the service anymore. And the device is much cheaper than what the people could think. And they do not need a COMPUTER.
PowerDsine 6000 Power over LAN Family
08 September 2003 - Power Over Ethernet
24/12/6 and Single Port Power over LAN Hubs enable delivery of operating power in addition to data over standard LAN infrastructure. The family ensures uninterrupted network operation by providing a 'power safe' path to the user, which is IEEE802.3af compliant.
Intersil, New Telecom Power IC With Advanced Protection Features for Worry-Free Designs
02 September 2003 - Power Over Ethernet
Intersil Corporation (Nasdaq:ISIL), a world leader in the design and manufacture of high performance analog solutions, today announced the ISL6721 single-ended current-mode PWM controller. The ISL6721 is designed to regulate power in telecom, datacom, and Power over Ethernet (802.3af) systems. It also has numerous applications in industrial power supplies.
PolySwitch SMD050-2018 resettable device protects PoE equipment
02 September 2003 - Power Over Ethernet
Tyco Electronics Power Components (Menlo Park, CA) announced Raychem Circuit Protection's new PolySwitch SMD050-2018 resettable device for telecom and networking applications. The SMD050-2018 device helps provide resettable over-current protection for Voice Over IP and powered Ethernet equipment, and is designed to meet the voltage and hold current requirements of the IEEE802.3af Ethernet specification.
Switch on for powered data networks
02 September 2003 - Power Over Ethernet
The days of travelling with lots of different adapters to ensure you can recharge your laptop, phone and other gadgets could soon be at an end. Instead of needing adapters, computer networks could soon be supplying the devices they interconnect with both data and power. Some makers of network equipment are already putting the power via data cable system into their products.
ORiNOCO 802.11b/g Products
22 August 2003 - Power Over Ethernet
Proxim introduces the first enterprise class 802.11b/g products, and they're also 802.3af compliant
Polycom IP Telephony
18 August 2003 - Power Over Ethernet
When considering Voice over IP endpoints, Polycom's Power over Ethernet enabled VoIP phones are a sound choice.
Maxim Hot Swap And Power Switiching
13 August 2003 - Power Over Ethernet
Find out more about the Maxim Power-Over-LAN range.
DSP Design Announce Power Over Ethernet Appliance Design Consultancy
13 August 2003 - Power Over Ethernet
DSP Design Limited, the UK's leading experts in low power x86 and pda technology, have announced their ability to offer a design service for companies who wish to use the Power Over Ethernet technology in their next product.
The Maturing Wireless LAN
12 August 2003 - Power Over Ethernet
Tony Rybczynski, director of strategic enterprise technologies for Nortel Networks, looks at the development of the Wireless LAN since 2000, bringing us through to the present day with a look at Power Over Ethernet powered models, in this article from Internet Telephony.
Intermec MobileLAN Access WA22
12 August 2003 - Power Over Ethernet
MobileLAN access WA22 is the next-generation dual radio access point that accommodates radios operating on both 802.11a and 802.11b RF bands. It was co-designed by PowerDsine
Trapeze Networks Mobility Exchange (MX)
12 August 2003 - Power Over Ethernet
The Trapeze Networks Mobility Exchange is a new class of network device that delivers Identity-Based Networking. It enables attributes like VLAN/subnet assignments, access control lists, authentication, usage tracking, location tracking and network statistics to stay with the user from wired to wireless and throughout the WLAN.
Aruba 5000 Power over Ethernet WLAN Switch
12 August 2003 - Power Over Ethernet
The first of its kind, Aruba's 5000 series represents a new approach to building, securing and managing 802.11 networks through a centralized and structured wireless architecture.
PoE Controllers Manage Power Autonomously
11 August 2003 - Power Over Ethernet
The LTC4258/59 quad powered Ethernet controllers perform all of the power-management operations required to implement the IEEE 802.3af Power over Ethernet standard in power sourcing equipment. Unlike some existing PoE controllers, these devices from Linear Technology can operate in a fully automatic mode without the intervention of a host controller.
Devil's Advocate: Ethernet power
11 August 2003 - Power Over Ethernet
'It has been coming for some time but we can now celebrate the formal ratification of the 802.3af IEEE standard. That is the standard for providing electrical power through ordinary Ethernet cabling. Early efforts have, unfortunately, been proprietary. The standard is a major breakthrough.' writes Martin Brampton in this Silicon.com article.
Analog & Power - Controller Chips Rise To PoE Challenges
11 August 2003 - Power Over Ethernet
Satisfying the requirements set forth in the IEEE 802.3af standard for Power over Ethernet isn't a trivial task, particularly with respect to the power-management operations required of power sourcing equipment, writes David G. Morrison on website Electronic Design.
Unified Access Architecture for Wired and Wireless Networks
08 August 2003 - Power Over Ethernet
The Unified Access Architecture from Extreme Networks introduces the first switch capable of delivering wired and wireless applications across a completely integrated enterprise infrastructure.
MiLAN EmPowered Ethernet
07 August 2003 - Power Over Ethernet
Connect MiLAN's ShAir BridgeTM and ShAir OfficeTM wireless products with MiLAN's EmPowered Ethernet Series of Injectors and Splitters using a single standard Cat 5 minimum Ethernet cable for both power and data.
Nortel Networks WLAN, Access Point 2220
01 August 2003 - Power Over Ethernet
Nortel Networks WLAN, Access Point 2220 provides points of access to the wired Ethernet network. It supports both 802.11b and 802.11a, permitting seamless secure IP roaming across the two standards, and it is 802.3af compliant.
Texas Instruments ICS To Accelerrate Adoption Of Power Over Ethernet
01 August 2003 - Power Over Ethernet
Building on its leading portfolio of advanced system power management technology, Texas Instruments Incorporated has announced its first power management integrated circuits for the emerging Power over Ethernet market.
HP Opens $30M R&D Lab in Singapore
01 August 2003 - Power Over Ethernet
Hewlett Packard have opened the doors to a new R&D laboratory to develop its ProCurve Networking product line, which is planned to include 802.3af compliant members, writes Michael Singer.
New Power Generation
29 July 2003 - Power Over Ethernet
An electrical storm is brewing in the Ethernet cable that will connect a mobile phone, laptop or any other gadget to the world, writes Kieren McCarthy in The Guardian. It is ironic that in a world where every minor technological achievement is hailed as a revolution, only a small number of specialist online news sites commented on the ratification last month of the 802.3af IEEE standard.
Introducing Foundry's BRAVVO Architecture For VoIP
25 July 2003 - Power Over Ethernet
Voice over IP is an application based on IP networks that enables Enterprises to exploit an array of new features, foster collaboration, and increase productivity. Foundry's VoIP solutions provide you with a step-by-step approach to deploy VoIP applications and help you understand the benefits as well as various considerations for your network planning.
Power and Ethernet Make The Perfect Union
25 July 2003 - Power Over Ethernet
A new technology that combines power and Ethernet networking is set to change the global IT marketplace sooner rather than later. Standards-based, Power over Ethernet is expected to replace older proprietary power sources and will impact both wired and wireless solutions. Gary Boniface takes a detailed look at the technology in this ITWeb article.
IEEE802.3af Compliant Digi One TS Splitter
25 July 2003 - Power Over Ethernet
The Digi One TS makes it easy to connect any serial device to your network.
3Com NBX PoE Phone Power Module
25 July 2003 - Power Over Ethernet
Enhance your network telephony with 802.3af Power Over Ethernet. The 3Com NBX Phone Power Module enables an NBX phone to receive Power over Ethernet forwarded from a 3Com Network Jack or any IEEE 802.3af-compliant power source.
Digi EasyPower
25 July 2003 - Power Over Ethernet
The Digi EasyPower Family provides simple, safe and efficient device power over existing LAN data cabling (Ethernet). It is ideal for applications where power outlets are not available at the optimal device location.
ORiNOCO Active Ethernet Provides POE Capabilities for a Wide Range of ORiNOCO Products
22 July 2003 - Power Over Ethernet
Active Ethernet is a feature of the ORiNOCO product line that provides power-over-Ethernet capabilities for the entire ORiNOCO family of enterprise, outdoor, and public area wireless networking equipment, including Access Points, Access Servers, and Outdoor Routers.
FastIron Edge Switch: A New Breed of Intelligent Edge Products
22 July 2003 - Power Over Ethernet
With two PoE enabled devices, the FastIron Edge Switch series provides greater flexibility, higher reliability, enhanced security, extensive redundancy, and expanded resiliency.
3Com Wireless LAN Building-to-Building Bridge
22 July 2003 - Power Over Ethernet
Extend your company's campus network economically, without leasing expensive dedicated lines or laying cable, by using this 802.3af-standard product.
3Com NJ90 Network Jack
21 July 2003 - Power Over Ethernet
The 3Com NJ90 Network Jack is a low-cost, unmanaged switch that mounts in the wall, expanding one LAN wall outlet into four Fast Ethernet network connections.
Scalable Multi- and Single-Port Power-over-Ethernet Solutions
21 July 2003 - Power Over Ethernet
Power-over-Ethernet solutions from Symbol Technologies deliver operating power and data to Spectrum24 Access Points via standard Category 5 Ethernet cable.
Pulse 10/100BASE-TX VoIP Magnetics Modules
21 July 2003 - Power Over Ethernet
Power over Ethernet compliant VoIP magnetics modules from Pulse.
3Com Power over Ethernet Single-Port Midspan Solution
21 July 2003 - Power Over Ethernet
Flexible, reliable inline power for Network Jacks. Transforms standard AC power into low-voltage DC that runs over your existing LAN cabling.
Power over Ethernet - Ready to Power On?
21 July 2003 - Power Over Ethernet
This 802.11Planet.com Tutorial by Beth Cohen & Debbie Deutsch will help you find out what PoE is all about and how it can make your life easier. You're planning to install the latest Voice over IP phone system to minimize cabling build-out costs when your company moves into new offices next month. Just imagine if you didn't need to be concerned about losing your telecommunications system every time there's a power outage.
Power over Ethernet to Reach New Areas
21 July 2003 - Power Over Ethernet
Hardware vendors are planning notebook and handheld computers to be launched in the next two years to exploit the new Power over Ethernet standard, writes Peter Williams on Computing.co.uk
3Com NJ90 Network Jack Wins Best of Interop Award at NetWorld+Interop 2003 Las Vegas
21 July 2003 - Power Over Ethernet
3Com NJ90 Network Jack as been awarded Best of Interop, Enterprise Network Infrastructure category by CMP Media's CRN, Network Computing, VARBusiness and Network Magazine at NetWorld+Interop 2003 Las Vegas.
Low Cost Isolated Power Supply for Power-Over-Ethernet Applications
17 July 2003 - Power Over Ethernet
This Texas Instruments document describes an easy-to-use, low-cost isolated power supply to be used in Power over Ethernet powered devices, that is based on TI's TPS2370 PoE interface switch.
+65V Simple Swapper Hot-Swap Switches
17 July 2003 - Power Over Ethernet
The MAX5910/MAX5917 are fully integrated hot-swap switches for positive supply rails. These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing glitches on the backplane power-supply rail.
LTC4257: POE Interface Controller Simplifies Powered Device Design for IEEE 802.3af Applications
17 July 2003 - Power Over Ethernet
Building on its industry-leading Hot SwapTM technology, Linear Technology Corporation introduces the LTC4257 Power over Ethernet Interface Controller, incorporating virtually all the circuitry necessary to connect a powered device to an IEEE 802.3af powered Ethernet network.
Pingtel SIPxchange IP PBX
16 July 2003 - Power Over Ethernet
Pingtel SIPxchange IP PBX is the first breakthrough in enterprise communications since the advent of digital PBXs 20 years ago. SIPxchange leapfrogs digital PBXs and the first wave of IP PBXs with its Infinity.0 Technology architecture.
Agere Systems' VoIP Phone-On-A-Chip
16 July 2003 - Power Over Ethernet
This solution provides complete silicon for an IP telephone set residing on a LAN. These devices integrate all the requisite functionality to interface directly to an Ethernet network, telephone handset, speakerphone, PDA, and other user interfaces.
Maxim Produce +48V Quad Hot-Swap Controllers For Power-Over-LAN
16 July 2003 - Power Over Ethernet
The MAX5913/4 are quadruple hot-swap controllers. They independently control four external N-channel switches to hot-swap system loads from a single VCC supply line.
CDT Announces Red Hawk–Pingtel Interoperability Power Over LAN IP Telephony Solution
16 July 2003 - Power Over Ethernet
Cable Design Technologies today (April, 2003) announced that its Red Hawk PowerSense Mid-Span Power Hubs are certified interoperable with Pingtel xpressa, the world's leading Session Initiation Protocol IP phone.
DSP Design Announce Power Over Ethernet Appliance Design Consultancy
16 July 2003 - Power Over Ethernet
DSP Design Limited, the UK's leading experts in low power x86 technology, have announced their ability to offer a design service for companies who wish to use the Power Over Ethernet technology in their next product
A Revolution In Industrial Networking?
15 July 2003 - Power Over Ethernet
Ethernet-based communication TCP/IP protocols are starting to invade all levels of the mass communication market but, as Mark Jackson of Pulse points out in this IndustrialNetworking.co.uk article, Power over Ethernet is set to revolutionise industrial-based networking systems.
Red Hawk 8000-Series Splitters
15 July 2003 - Power Over Ethernet
Red Hawk offer data and power splitters as part of PowerSense range. Red Hawk's PowerSense 8000 Series is mainly focused on Mid-Span Hubs. However, the PowerSense accessory products include splitters necessary for use with most wireless LAN access points.
Red Hawk launch BL-8000 PowerSense Power over Ethernet Modular Multiport In-Line Power Hub
15 July 2003 - Power Over Ethernet
The PowerSense Mid-Span Power Hub from Red Hawk provides a safe and efficient way to provide power to VoIP Phones, Wireless LAN Access Points, Web Cameras and other LAN Devices without the use of an external power supply for each device.
A comprehensive guide to Voice over IP, by Roberto Arcomano.